A theoretical study of the lowest electronic states of azobenzene: the role of torsion coordinate in the cis–trans photoisomerization

In the present paper we report the results of a multiconfigurational computational study on potential-energy curves of azobenzene along the NN twisting to clarify the role of this coordinate in the decay of the S₂(*) and S₁(n*) states. We have found that there is a singlet state, S₃ at the trans geometry, on the basis of the doubly excited configuration n²*², that has a deep minimum at about 90° of twisting, where it is the lowest excited singlet state. The existence of this state provides an explanation for the short lifetime of S₂(*) and for the wavelength-dependence of azobenzene photochemistry. We have characterized the S₁(n*) state by calculating its vibrational frequencies, which are found to correspond to the recently observed transient Raman spectrum. We have also computed the potential-energy curve for the triplet T₁(n*) at the density functional theory B3LYP level, which indicates that in this state the isomerization occurs along the twisting coordinate.Acknowledgement The financial support from MIUR (project Modellistica delle proprietà spettroscopiche di sistemi molecolari complessi funds ex 60% and project Dinamiche molecolari in sistemi di interesse chimico funds ex 40%), from the University of Bologna (Funds for Selected Research Topics) is gratefully acknowledged.Contribution to the Jacopo Tomasi Honorary Issue     

Transmembrane anion transport mediated by halogen bonding and hydrogen bonding triazole anionophores

Transmembrane ion transport by synthetic anionophores is typically achieved using polar hydrogen bonding anion receptors. Here we show that readily accessible halogen and hydrogen bonding 1,2,3-triazole derivatives can efficiently mediate anion transport across lipid bilayer membranes with unusual anti-Hofmeister selectivity. Importantly, the results demonstrate that the iodo-triazole systems exhibit the highest reported activity to date for halogen bonding anionophores, and enhanced transport efficiency relative to the hydrogen bonding analogues. In contrast, the analogous fluoro-triazole systems, which are unable to form intermolecular interactions with anions, are inactive. The halogen bonding anionophores also exhibit a remarkable intrinsic chloride over hydroxide selectivity, which is usually observed only in more complex anionophore designs, in contrast to the readily accessible acyclic systems reported here. This highlights the potential of iodo-triazoles as synthetically accessible and versatile motifs for developing more efficient anion transport systems. Computational studies provide further insight into the nature of the anion-triazole intermolecular interactions, examining the origins of the observed transport activity and selectivity of the systems, and revealing the role of enhanced charge delocalisation in the halogen bonding anion complexes.

Halogen and hydrogen bonding 1,2,3-triazole derivatives efficiently mediate anion transport across lipid bilayer membranes with unusual anion selectivity profiles.     

New poly(d-glucaramidoamine)s induce DNA nanoparticle formation and efficient gene delivery into mammalian cells

In this report, four new poly(d-glucaramidoamine)s (1-4) have been designed to lower the toxicity of conventional polymeric nucleic acid delivery vehicles by incorporating a carbohydrate comonomer within a polyethylenimine (PEI)-like backbone. Polymers 1-4 were synthesized via polycondensation of esterified d-glucaric acid and four different amine-containing comonomers [diethylenetriamine (1), triethylenetetramine (2), tetraethylenepentamine (3), and pentaethylenehexamine (4)] in methanol. Viscometry and NMR studies suggest that the polymers are mostly linear (for 1-4, the alpha value in the Mark-Houwink-Sakurada equation = 0.6-0.7), thus indicating that polymerization occurs predominantly through the primary amines with a low degree of branching off the secondary amines. Results of gel electrophoresis shift assays show that polymers 1-4 bind pDNA at N/P ratios of 5, 3, 2, and 2, respectively. Also, dynamic light scattering and TEM experiments indicate that 1-4 compact DNA into nanoparticles (polyplexes) between 140 and 440 nm at an N/P ratio of 30. Furthermore, polyplexes formed with 1-4 deliver pDNA (plasmid DNA) containing the firefly luciferase reporter gene to BHK-21 cells in a nontoxic and highly efficient manner (as determined by luciferase gene expression). In particular, polymer 4 reveals very high delivery efficiency (equivalent to linear PEI). This result may be due in part to the "proton sponge" hypothesis proposed by Behr et al. Polymers containing amines that are protonated in the endosomal pH range (between about 7.4-5.0) reveal enhanced gene delivery profiles.     

Catalysis of the beta-elimination of HF from isomeric 2-fluoroethylpyridines and 1-methyl-2-fluoroethylpyridinium salts. Proton-activating factors and methyl-activating factors as a mechanistic test to distinguish between concerted E2 and E1cb irreversible mechanisms

Second-order rate constants, k(OH)(N), M(-)(1) s(-)(1), for the beta-elimination reactions of HF with 2-(2-fluoroethyl)pyridine (2), 3-(2-fluoroethyl)pyridine (3), and 4-(2-fluoroethyl)pyridine (4) in OH(-)/H(2)O, at 50 degrees C and mu = 1 M KCl, are = 0.646 x 10(-)(4) M(-)(1) s(-)(1), = 2.97 x 10(-)(6) M(-)(1) s(-)(1), and = 5.28 x 10(-)(4) M(-)(1) s(-)(1), respectively. When compared with the second-order rate constants for the same processes with the nitrogen-methylated substrates 1-methyl-2-(2-fluoroethyl)pyridinium iodide (5), 1-methyl-3-(2-fluoroethyl)pyridinium iodide (6), and 1-methyl-4-(2-fluoroethyl)pyridinium iodide (7), the methyl-activating factor (MethylAF) can be calculated from the ratio k(OH)(NCH)3/, and a value of 8.7 x 10(5) is obtained with substrates 5/2, a value of 1.6 x 10(3) with 6/3, and a value of 2.1 x 10(4) with 7/4. The high values of MethylAF are in agreement with an irreversible E1cb mechanism (A(N)D(E) + D(N)) for substrates 5 and 7 and with the high stability of the intermediate carbanion related to its enamine-type structure. In acetohydroxamate/acetohydroxamic acid buffers (pH 8.45-9.42) and acetate/acetic acid buffers (pH 4.13-5.13), the beta-elimination reactions of HF, with substrates 2 and 4, occur at NH(+), the substrates protonated at the nitrogen atom of the pyridine ring, even when the [NH(+)] is much lower than the [N], the unprotonated substrate, due to the high proton-activating factor (PAF) value observed: 3.6 x 10(5) for 2 and 6.5 x 10(4) for 4 with acetohydroxamate base. These high PAF values are indicative of an irreversible E1cb mechanism rather than a concerted E2 (A(N)D(E)D(N)) mechanism. Finally, the rate constant for carbanion formation from NH(+) with 2 is k(B)(NH)+ = 0.35 M(-)(1) s(-)(1), which is lower than when chlorine is the leaving group ( = 1.05 M(-)(1) s(-)(1); Alunni, S.; Busti, A. J. Chem. Soc., Perkin Trans. 2 2001, 778). This is direct experimental evidence that some lengthening of the carbon-leaving group bond can occur in the intermediate carbanion. This is a point of interest for interpreting a heavy-atom isotope effect.     

Ion pair charge-transfer complexes between anionic and cationic metal-dithiolenes [M(II) = Pd,Pt

New [M(R(2)pipdt)(2)](BF(4))(2) salts [R(2)pipdt = N,N'-dialkyl-piperazine-2,3-dithione; M = Pd(II), R = Me and M = Pt(II), R = Me, Et, Pr(i)] bearing redox-active cationic dithiolene complexes have been prepared and characterized. These cations react with the redox-active [M(mnt)(2)](2-) [M = Pd(II), Pt(II); mnt = maleonitrile-2,3-dithiolate] anionic dithiolenes to form salts describable as ion pair charge-transfer complexes. X-ray crystallographic studies have shown that [M(Me(2)pipdt)(2)][M(mnt)(2)] complexes, with M = Pd(II) and Pt(II), are isomorphous. Crystal data of the Pt salt (3a): triclinic, Ponemacr; (No. 2); Z = 1; T = 293(2) K; a = 6.784(7) A, b = 8.460(6) A, c = 13.510(5) A, alpha = 100.63(2) degrees, beta = 104.04(2) degrees, gamma = 96.90(2) degrees; R1 = 0.0691 [wR2 = 0.2187 (all data)]. Structural data show that approximately square-planar [Pt(Me(2)pipdt)(2)] dications and regular square-planar [Pt(mnt)(2)] dianions form an infinite anion-cation one-dimensional stack along axis a with a Pt...Pt a/2 distance of 3.392 A and a Pt...Pt...Pt angle of 180 degrees. Anions and cations arrange themselves face-to-face so as to take on a staggered arrangement. These salts exhibit strong absorptions in the visible-near-infrared region assigned to ion pair charge-transfer transitions. A relation between the optical and thermal electron transfer in the solid state is obtained using a "Marcus-Hush model", and a solid-state electrical conductivity in agreement with expectations is observed. Vibrational spectroscopy is in agreement with the existence of charge-transfer interactions between the cationic and anionic components of the salts.     

Poly(butylene terephthalate)/poly(ε-caprolactone) blends: Influence of PCL molecular mass on PBT melting and crystallization behavior

The isothermal crystallization kinetics and melting behavior of poly(butylene terephthalate) (PBT) in binary blends with poly(ε-caprolactone) (PCL) was investigated as a function of PCL molecular mass by differential scanning calorimetry and optical microscopy. The components are miscible in the melt when oligomeric PCL (M_w = 1250) is blended with PBT, whereas only partial miscibility was found in mixtures with higher molecular mass (M_w = 10,000 and 50,000). The equilibrium melting point of PBT in the homopolymer and in blends with PCL was determined through a non-linear extrapolation of the T_m = f(T_c) curve. The PBT spherulitic growth rate and bulk crystallization rate were found to increase with respect to plain PBT in blends with PCL1250 and PCL10000, whereas addition of PCL50000 causes a reduction of PBT solidification rate. The crystallization induction times were determined by differential scanning calorimetry for all the mixtures through a blank subtraction procedure that allows precise estimation of the crystallization kinetics of fast crystallizing polymers. The results have been discussed on the basis of the Hoffman-Lauritzen crystallization theory and considerations on both the transport of chains towards the crystalline growth front and the energy barrier for the formation of critical nuclei in miscible and partially miscible PBT/PCL mixtures are widely debated.     

Hybrid fluorocarbon-hydrocarbon CO2-philic surfactants. 2. formation and properties of water-in-CO2 microemulsions

Hybrid fluorocarbon-hydrocarbon (F-H) sulfate surfactants are shown to be efficient stabilizers in water-in-CO2 (w/c) microemulsions. The chain structure and F-H ratio affect the regions of P-T phase stability and aggregation structure in these w/c phases. High-pressure near-infrared spectroscopy and small-angle neutron scattering measurements of microemulsified water provide evidence for the stabilization of w/c microemulsion droplets. The relative lengths of the two chains were found to influence the favored aggregation structure: for symmetric chain surfactants (F8H8, F7H7) spherical reverse micelles are present, but for asymmetric chain surfactants (F7H4, F8H4) extended cylinder aggregates form. These changes in aggregation are consistent with different surfactant packing parameters owing to the controlled variations in molecular structure. Furthermore, the general order of w/c phase transition pressures (F8H8 < F7H7 and F8H4 < F7H4) is in line with estimations of surfactant fractional free volume, as proposed by Johnston et al. (J. Phys. Chem. B 2004, 108, 1962-1966). Studies of adsorption at the poly(dimethylsiloxane)-water interface are shown to be valuable for assessing the CO2-philicity of new surfactants. All in all, the symmetric F8H8 and F7H7 analogues are seen to be the most efficient compounds from this class for applications in CO2.     

Capillary sodium dodecyl sulfate-DALT electrophoresis with laser-induced fluorescence detection for size-based analysis of proteins in human colon cancer cells

Capillary sodium dodecyl sulfate (SDS)-DALT electrophoresis (SDS-DALT-CE) refers to CE separation of proteins based on their size; DALT is the abbreviation for Dalton, the unit used to describe molecular weight. In this work, seven proteins from 18 to 116 kDa were denatured by SDS, labeled by 3-(2-furoyl) quinoline-2-carboxaldehyde, separated by SDS-DALT-CE in polyethylene oxide sieving matrix, and detected by laser-induced fluorescence (LIF) in a sheath flow cuvette. This method was combined with detergent differential fractionation, which is a protein fractionation method using a series of detergent-containing buffers to sequentially extract protein fractions from cells, to analyze the proteins in HT29 human colon adenocarcinoma cells. In addition, on-column labeling was demonstrated for protein analysis by SDS-DALT-CE with LIF, and applied to analysis of proteins in a single HT29 cancer cell. Most proteins had molecular masses from 10 to 120 kDa. Similar protein profiles were obtained for single cells and protein extract of a large cell population.     

Site-specific ligation of anthracene-1,8-dicarboxylates to an Mn12 core: a route to the controlled functionalisation of single-molecule magnets

A novel single-molecule magnet of the Mn12 family, [Mn12O12(O2CC6H5)8(L)4(H2O)4].8CH2Cl2, has been synthesised by site-specific ligand exchange using a tailor-made dicarboxylate (L2-), which leads to selective occupation of axial binding sites.     

Metal ion catalysis in the beta-elimination reactions of N-[2-(4-pyridyl)ethyl]quinuclidinium and N-[2-(2-pyridyl)ethyl]quinuclidinium in aqueous solution

Catalysis of the beta-elimination reaction of N-[2-(4-pyridyl)ethyl]quinuclidinium (1) and N-[2-(2-pyridyl)ethyl]quinuclidinium (2) by Zn(2+) and Cd(2+) in OH(-)/H(2)O (pH = 5.20-6.35, 50 degrees C, and mu = 1 M KCl) has been studied. In the presence of Zn(2+), the elimination reactions of both isomers occur from the Zn(2+)-complexed substrates (C). The equilibrium constants for the dissociation of the Zn(2+)-complexes are as follows: K(d) = 0.012 +/- 0.003 M (isomer 1) and K(d) = 0.065 +/- 0.020 M (isomer 2). The value of k(C)(H2O) for isomer 1 is 4.81 x 10(-6) s(-1). For isomer 2 both the rate constants for the "water" and OH(-)-induced reaction of the Zn(2+)-complexed substrate could be measured, despite the low concentration of OH(-) in the investigated reaction mixture [k(C)H2O)= 1.97 x 10(-6) s(-1) and k(C)(OH-)= 21.9 M(-1) s(-1), respectively]. The measured metal activating factor (MetAF), i.e., the reactivity ratio between the complexed and the uncomplexed substrate, is 8.1 x 10(4) for the OH(-)-induced elimination of 2. This high MetAF can be compared with the corresponding proton activating factor (Alunni, S.; Conti, A.; Palmizio Errico, R. J. Chem. Soc., Perkin Trans. 2 2000, 453), PAF = 1.5 x 10(6) and is in agreement with an E1cb irreversible mechanism (A(xh)D(E)* + D(N)) (Guthrie, R. D.; Jencks, W. P. Acc. Chem. Res. 1989, 22, 343). A value of k(C)(H2O)>or= 23 x 10(-7) s(-1) is estimated for the Cd(2+)-complexed isomer 2, while catalysis by Cd(2+) has not been observed for isomer 1.